(8639) 25-96-50, 25-97-16, (495) 505-52-35
E-mail: info@hydrophobe.ru
pochta@hydrophobe.ru
Website version: ENG;    RUS.        ICQ: 550825964

Horizontal Directional Drilling (HDD) Equipment

 Performing works on pipe laying by the HDD method
Development and introduction of energy saving technologies

Horizontal Drilling Machine UGB-2M


The Horizontal Drilling Machine UGB-2M completed with tools is intended for drilling horizontal bore holes 220mm in diameter at a distance up to 30m that are used for laying cable lines, gas pipeline and water supply system situated under railways, roads and irrigation channels. Maximum efficiency is reached at a distance up to 20m.

Horizontal Drilling Machine UGB-2M:


The machine UGB-2M was modernized in 2009. Its reliability and performance characteristics were improved.

The machine has the following features:

- mobility and portability - simplicity of operation and maintenance
- no consumables are required
- no qualified personnel is required
- maximum time of machine deployment in the field is 20 minutes.


The Horizontal Drilling Machine UGB-2M consists of:

1. An engine
2. A frame
3. A reduction gear
4. V-belt transmission
5. An automatic clutch
6. A gearbox
7. Control devices

   -2

UGB-2M in operation

Download the video UGB-2M in operation ->>>
If the video doesnt play you should set up the codec ->>>

Technical characteristics of the Horizontal Drilling Machine UGB-2M:

Characteristics

Value

Bore hole drilling diameter, mm (depending on soil)

115 - 220

Maximum length of bore hole drilling, m (depending on soil)

30

Drilling speed, m/h (depending on soil)

8

Angle of transversal static stability, degrees, at most

15

Engine

Type

gasoline, four-cycle

Power, hp

6

Clutch

Type

Automatic

Engine shaft speed for the clutch to actuate, rpm

1200

Drive reducer

Conic

Reduction gear oil

Transmission, by State Standard Specification 23652-79

Reduction gear oil volume, ml

150

Package of drilling tools and equipment


Nozzle d115
String L=2 m
String L=2 m with centering disc
String L=1 m
String transitional 0.6 m
Drill
Guide track L=1.5 m
Attaching quick-detachable head
Carriage for nozzle cleaning
Ramrod


2
12
2
1
1
1
2
1
1
1

Overall dimensions of UGB-2M (without tools)


length, mm
width, mm
height, mm


650
800
800

Mass

The Horizontal Drilling Machine, kg, at most

Package of tooling and equipment, kg, at most

85

215

Maintenance

3 people

 

 

(c) Gidrofob 2010